I've recently had to set up a new machine, but didn't have an install cdrom available, so I decided to use the easiest method for installing Ubuntu; PXE booting. Here's how I did it. PXE involves setting up two simple technologies, DHCP and TFTP. We start by setting up TFTP.

TFTP is Trivial File Transfer Protocol, a cut down version of FTP. There are a number of TFTP servers in Debian and Ubuntu, but not all of them support the extensions that the pxelinux bootloader used by debian-installer need. Experience has shown that tftpd-hpa works correctly, so we'll want to install that.

ace root% apt-get install tftpd-hpa

Note: If this installs an inetd at the same time, you may need to restart the inetd so it enables the tftpd service.

The tftpd will serve files out of /var/lib/tftpboot, so we need to add some files for it to serve. You can use this script to fetch various netboot installers from Ubuntu's servers.

#!/bin/bash

set -u
set -e

cd /var/lib/tftpboot

for dist in dapper feisty gutsy hardy intrepid; do
    mkdir -p $dist
    for arch in amd64 i386; do
        mkdir -p $dist/$arch/
        (cd $dist/$arch/ && ncftpget -RT \
           ftp://archive.ubuntu.com/ubuntu/dists/$dist/main/installer-$arch/current/images/netboot/)
    done
done

Download ubuntu-tftp-update.sh

Now we need to alter our dhcpd configuration. (You are using DHCP aren't you?) All we need to add is a group declaration to your subnet declaration, adding a next-server and a filename parameter. You can then add a host declaration for any machine you want to netboot into the installer.

group { # intrepid amd64
     next-server 10.0.0.1;
     filename "intrepid/amd64/pxelinux.0";
     host foobar { hardware ethernet 00:22:15:45:cc:fa; fixed-address foobar.example.com; }
}

You'll need to restart the dhcp server so it picks up the new setting. The next-server parameter is the name or IP address of your tftp server. filename is the path to the bootloader. Obviously, you can use this to pick which version of the installer you want to run. If you do a lot of installations, it might be worth configuring every installer you're likely to use and then move hosts in and out of the suitable group as and when you need to install them.

All that's left to do now is to boot the computer and set it to boot from the network and enjoy medialess installation.